MINARC M 223P AUTO GM

MIM223PGM

Premium portable 110/240V MIG/MAG welding machine, providing 220 A @ 20% duty cycle from a 1-phase and weighs only 11 kg.

It features manual, synergic, and pulse welding modes, offering flexibility and ease of use. The power source can also operate with generator, includes five memory channels και διαθέτει Euro-Connector for the welding torch.

Compatible with a wide range of materials, including:
steel (Fe), stainless steel (Ss), aluminum (Al), CuSi, as well as with , Flux cored and Gasless filler wires.

Η συσκευασία περιλαμβάνει:
power source, gas hose, wire feed roll (drive roll), shoulder strap, ground cable, power plug, torch handle, and welding torch.

DESCRIPTION	VALUE
Mains connection voltage	220…240 V ±10 %
Mains connection voltage (MV low range)	110…120 V ±10 %
Mains connection phases	1~50/60 Hz
Mains connection cable type	3G, H07RN-F
Mains connection cable size	2.5 mm²
Rated maximum input power [S1max]	7 kVA
Mains fuse	16 A
Mains fuse (@MV low range)	15 A
Idle state power consumption [P1idle]	10 W
Output, duty cycle % at rated max. current, MIG	20%
Output at +40 °C, rated max current, MIG	220 A
Output at +40 °C, 60% MIG	160 A
Output at +40 °C, 100% MIG	140 A
Output, duty cycle % at rated max. current, MIG (@MV low range)	20%
Output at +40 °C, rated max current, MIG (@MV low range)	120 A
Output at +40 °C, 60% MIG (@MV low range)	95 A
Output at +40 °C, 100% MIG (@MV low range)	75 A
Output range, MIG	15 A / 11 V … 220 A / 28 V
Output range, MIG (@MV low range)	15 A / 11 V … 120 A / 23 V
Voltage adjustment range, MIG	10 … 32 V
Power factor at rated maximum current [λ]	1
Efficiency at rated maximum current [η]	0.85%
EMC class	A
Welding connection type	Euro
Wire feed mechanism	Single-motor, 2-roll
Diameter of feed rolls	30 mm
Filler wire diameter, Fe	0.6 … 1.2 mm
Filler wire diameter, Fe-MC/FC	1 … 1.2 mm
Filler wire diameter, Ss	0.6 … 1 mm
Filler wire diameter, Al	0.8 … 1.2 mm
Wire feed speed	0.5 … 18 m/min
Maximum wire spool weight	5 kg
Maximum wire spool diameter	200 mm
Operating temperature	-20 … 40 °C
Storage temperature	-40 … 60 °C
Recommended minimum generator power [Sgen]	8 kVA
Degree of protection (fully installed)	IP23
External dimensions, length	460 mm
External dimensions, width	221 mm
External dimensions, height	365 mm
Weight without accessories	10.85 kg
Standards	IEC 60974-1, -10