MINARC M 223 AUTO GM
Request a quote
MIM223GM
Premium portable 110/240V MIG/MAG welding machine, providing 220 A @ 20% duty cycle, with power supply from a 1-phase, and weighs only 12 kg.
It features manual and synergic welding modes, offering flexibility and ease of use. The power source can also operate with generator, and includes five memory channels for storing settings.
Compatible with a wide range of materials, including:
steel (Fe), stainless
steel (Ss), aluminum (Al), CuSi, as well as with wires (flux-cored) and gasless filler wires.
Includes:
power source, gas hose, wire feed roll (drive roll), shoulder strap, ground cable, power plug, torch handle, and welding torch.
Technical Specifications
| DESCRIPTION | VALUE |
| Mains connection voltage | 220…240 V ยฑ10 % |
| Mains connection voltage (MV low range) | 110…120 V ยฑ10 % |
| Mains connection phases | 1~50/60 Hz |
| Mains connection cable type | 3G, H07RN-F |
| Mains connection cable size | 2.5 mmยฒ |
| Rated maximum input power [S1max] | 7 kVA |
| Mains fuse | 16 A |
| Mains fuse (@MV low range) | 15 A |
|
Idle state power consumption [P1idle] |
10 W |
| Output, duty cycle % at rated max. current, MIG | 20% |
| Output at +40 ยฐC, rated max current, MIG | 220 A |
| Output at +40 ยฐC, 60% MIG | 160 A |
| Output at +40 ยฐC, 100% MIG | 140 A |
| Output, duty cycle % at rated max. current, MIG (@MV low range) | 20% |
| Output at +40 ยฐC, rated max current, MIG (@MV low range) | 120 A |
| Output at +40 ยฐC, 60% MIG (@MV low range) | 95 A |
| Output at +40 ยฐC, 100% MIG (@MV low range) | 75 A |
| Output range, MIG | 15 A / 11 V … 220 A / 28 V |
| Output range, MIG (@MV low range) | 15 A / 11 V … 120 A / 23 V |
| Voltage adjustment range, MIG | 10 … 32 V |
|
Power factor at rated maximum current [ฮป] |
1 |
| Efficiency at rated maximum current [ฮท] | 85% |
| EMC class | A |
| Welding connection type | Built-in |
| Wire feed mechanism | Single-motor, 2-roll |
| Diameter of feed rolls | 30 mm |
| Filler wire diameter, Fe | 0.6 … 1.2 mm |
| Filler wire diameter, Fe-MC/FC | 1 … 1.2 mm |
| Filler wire diameter, Ss | 0.6 … 1 mm |
| Filler wire diameter, Al | 0.8 … 1.2 mm |
| Wire feed speed | 0.5 … 18 m/min |
| Maximum wire spool weight | 5 kg |
| Maximum wire spool diameter | 200 mm |
| Operating temperature | -20 … 40 ยฐC |
| Storage temperature | -40 … 60 ยฐC |
| Recommended minimum generator power [Sgen] | 8 kVA |
| Degree of protection (fully installed) | IP23 |
| External dimensions, length | 460 mm |
| External dimensions, width | 221 mm |
| External dimensions, height | 365 mm |
| Weight without accessories | 12 kg |
| Standards | IEC 60974-1, -10 |
